Why You Should Leave Double Glazing Window repair double glazing to the Experts
A damaged double glazing window could let in draughts, cause condensation, and could also affect the security of your home. Repairs or replacements are possible however it is best to leave it to experts.
Misting is one of the most common signs that the seal between your windows has broken. This could be a costly problem that needs to be dealt with quickly.
Panes that are chipped or cracked
It's not only an eye-sore when your glass is chipped, cracked or chipped, but it can also allow air to enter and increase your heating and cooling costs. If the double pane glass has cracked or is damaged, window manufacturers recommend replacing it to ensure a strong seal and keep your home warm and dry.
The good news is that fixing damaged windows isn't nearly as difficult or expensive as it might seem. You must act quickly. Window cracks tend to get worse over time, causing energy leaks, so you'll want to get the job done in the shortest time possible to avoid any further issues.
A tiny crack could turn into a web of cracks which will render your double-pane windows unusable, which is why it's vital to take the appropriate steps to fix it before it gets out of control.
Taping the cracks with masking tape or duct tape is a simple and quick method. Typically, a single strip of tape applied to both sides of the crack will suffice to cover superficial cracks like stress cracks caused by differences in temperature, however deeper cracks might require you to extend the tape beyond the crack edges on both sides.
You can also apply an unobtrusive glass glue like Loctite or Gorilla Glue. These glues are designed specifically for windows. This kind of glue is similar to nail polish in that it fills the crack, stopping it from getting worse and sealing the area so that air can't get through from outside. The major difference between this type of glue and nail polish is that it's more durable and doesn't crack or peel.
If you're looking for a more temporary solution, cut a piece of plastic large enough to cover the hole or crack from a trash bag, shower curtain or tarp. Then, you can tape the plastic covering to your window using masking tape or duct tape and allow it to dry. This will block out the rain, wind or bugs while you are waiting for your new double-pane window.
For a more durable solution, apply two-part epoxy resin on the cracked area of your window. This kind of putty will seal the crack and can be painted to match your window frame.
Condensation
Condensation is usually located between window panes and can trigger a range of issues, including the growth of mold. It can also lead to the loss of heat through your windows. Therefore, it is essential to tackle it as soon as you can. This happens when moist and warm air is in contact with the cooler surface. The water vapor from the air condenses. You can read more about condensation here. A professional can replace the seal, upgrade your glazing, or even put in new windows to fix this issue permanently.
Broken locks or broken handles
It's not often, but double glazing window handles can break. This can be incredibly frustrating and leave your home vulnerable to burglars who could be able open the handle easily to unlock the window. If you know what to look for, it's relatively simple and affordable to replace the broken window handle.
The mechanism that opens a uPVC window is made up of three parts, the handle, the gearbox and the drive gear. The handle operates the gearbox, which then operates the drive gear that allows the window to be opened or closed. If the handle breaks it is likely that the gearbox becomes blocked and cannot function. This can be caused by broken spindles within the handle, or simply wear and tear.
You'll need to replace the lock if it's broken. To do this, you will be required to find the fixing screws or pins which hold it in place These are typically located on the outside of the handle. Once you've removed the old handle and replaced it with the new one, and secure it using the screws or pins. Make sure you ensure that the handle is aligned correctly with the frame before installing it. Be sure to cover any exposed screws with the screws covers to conceal them.
uPVC windows that don't close properly don't just let cold air in, but they could also let valuable heat escape, and possibly cause water damage and damp. uPVC windows should not be left open, as this can invite burglars to enter.
If your uPVC window is not closing properly, you'll have to contact your installer or a local tradesman to seek assistance. They'll be able to determine the issue and guide you on the best method for a repair. They are able to provide a full range of double glazing repairs and services, which includes installing new locks, hinges or handles, if required.
Dropping Panes
Double-pane windows are an excellent investment for your home. They offer insulation and give your home a modern style which will increase the value of your home. There are some problems that can arise with your new windows, and you must know when to take action.
Cracked or chipped panes are a sign that your windows require to be replaced. These damages will let outside air into your home and make it difficult for cooling systems to keep up with the temperature of your home. This can cause your system to perform more than it should, resulting in an increase in the cost of energy.
Fogging in between the panes of glass can also indicate that your windows need replacing. This is because the inert gas in the seal between the glass has escaped. The seal will need replacing when this happens and is not possible to do it separately.
The seals on your windows made of rubber may begin to deteriorate over time. This could be due to exposure to sun, aging, and the use of harsh cleaning products. When the seals begin to break down they may be unable to effectively insulate your home.
You should call a professional to replace a window that is chipped or cracked. This is not something that you should attempt yourself, as handling broken glass is dangerous. They will have all the tools necessary to safely remove and replace the broken glass.
You can repair a double-glazed window by replacing the inner or outer pane. It can be more expensive depending on the size and type of your window. This is the most efficient option when you want to reduce your energy costs and improve the efficiency of your double-glazed window.
Remember that your double-glazed windows frame may require replacement. When the glass panes are replaced, the frames usually need to be replaced. A glass professional will assist you in selecting the best double-glazed window to fit your home.